Best Home Sauna – A Guide to DIY Outdoor Saunas


Enjoy The chillness with A Warm Sauna!

Do you want to get rid of cold weather blues but don’t want to spend a fortune? Then you need to check out these homemade saunas!

If you live in a colder climate, you know exactly how much money you waste heating your home every year. This is especially true if you have kids who require constant heat during the winter months. If you want to save money on your heating bills, you should consider making your outdoor sauna.

What is the best type of outdoor sauna?

It depends on your budget, lifestyle, and personal preferences.” While there are a few types of outdoor saunas that you can build yourself for under 1,000 dollars, most people would need to spend more than that if they want a high-end model. The top three categories in terms of price range and quality:

The Best Budget Saunas – Under $1000, The Best Mid Range Saunas – $2000 to $3000, And The Best High-End Saunas – Over $4000.

How do you know if your home is suitable for a sauna?

You should look out for some things when determining if your home is suitable for a backyard sauna. For example, you need to ensure that your home has enough space to accommodate a sauna, that the area is well ventilated, and that it does not get too hot during the summer months. It would help if you also ensured that any trees or other vegetation around your house would not pose a problem and that your neighbors wouldn’t complain about the noise.

How much does it cost to build an outdoor sauna?

First, consider whether you’re building a freestanding sauna or a portable sauna. A freestanding sauna can be made for less than $1,000. However, a portable sauna may cost more than $2,500.

Second, consider how many people will use the sauna. Groups of four or fewer people often use portable saunas. Freestanding saunas are usually designed to accommodate more significant numbers of people.

Third, consider what materials you plan to use. For example, concrete blocks are typically cheaper than manufactured stone. Manufactured stones come ready to use but are generally more expensive. But they also tend to weigh more and require more significant maintenance. The cost of building a sauna will vary depending on how much time you have available to complete the project and which materials you choose to use. If your goal is to save money, go with an inexpensive option such as using plywood boards or plastic sheets. However, if you want to create something
unique and beautiful, you may find better value by going with higher quality materials like cedarwood, stone, concrete, bricks, etc.

DIY: How To Build A Outdoor Sauna

Let’s get started! In this guide, we’ll walk through step-by-step instructions on building an essential sauna at home. We’ll start by showing you how to construct a simple wood frame sauna. Then, we’ll move on to a more complex version, where we’ll add a chimney and a door to make a more functional sauna. Finally, we’ll cover a more elaborate design where we’ll include a fireplace and a window so that you can enjoy the outdoors even while inside your sauna.

Materials needed to build a sauna.

  • Wooden planks – 1 per 2 feet.
  • Plywood sheets – 4 pieces.
  • Cement – 8 bags.
  • Bricks – 12.
  • Concrete – 16 bags.
  • Drywall screws – 10 packs.
  • Metal nails – 50.
  • Steel rods – 2 pack.
  • 2x4s – 12.
  • Hinges – 6.
  • Locksets.
  • Plate glass – 3.

As mentioned above, we used several different materials to build our sauna. Wood was one of them. Plywood sheets were another critical component. They made up the walls of our sauna and helped reduce heat loss from the structure. Concrete is often used to build outdoor structures because it is solid and durable. It was used to form the base of our sauna. Metal was another popular material that we used in our construction. Steel rods were used to support the roof.

In addition, metal nails were used to fasten the boards together. Drywall screws were used to secure the drywall sheeting to the wood framing. Locksets were used to lock the doors. Finally, plate glass was installed over the windows to help keep out insects and weather.

Step-By-Step Instructions for building a Sauna

Here’s a detailed breakdown of each step involved in the process of constructing a sauna.

1) Cut the lumber into the necessary lengths.

Cutting the lumber into the required sizes is probably the most challenging part of the entire process. The first thing you want to do is measure the width and length of the room where you’re planning to install the sauna. This will allow you to cut all of the lumber into the correct size. Once you’ve measured the dimensions, grab a tape measurer and a pencil. Mark the center point of both ends of the wall and draw two lines perpendicular to the wall. These lines will be the cutting points for the lumber. Now, lay down the piece of wood along the marked line, making sure that the edges are parallel to the floor. Make cuts between the marks using a circular saw. Repeat these steps until you have completed the whole area. You can skip this step if you’re using plywood as the structural element since it already comes pre-cut.

2) Attach the side panels to the back panel.

Once you’ve finished cutting all of the lumber, it’s time to attach the sides to the back. Grab a level and use it to check if both sides are flat. Next, take the four corners of the back panel and place them against the wall. Use bolts and nuts to secure the corner pieces to the wall. Do the same with the bottom portion. It would help if you now had a wooden frame that looks something like this.

3) Assemble the other components.

If you’re going to be building a fireplace, then you need to have some concrete available. Take a bucket of cement and pour it onto the ground near the area where you intend to build the fireplace. Build a small platform out of bricks or rocks so that there won’t be any unnecessary movement when pouring the concrete. When the concrete has hardened, remove the bricks and stones. Now, drill holes into the
concrete to help hold the steel rods that go across the top of the firebox—drill three spots in the middle of the concrete slab and three holes spaced evenly around the edge.

4) Install the door frames.

The next step is to install the door frames. Remove the door from its hinges and set it aside. Lay down a piece of plywood on your work surface. Place the door on the plywood. Then, mark the exact position of the hinge holes with a marker—drill holes through the plywood at the positions indicated by the title. Insert the steel rod through the hole and tighten the nut onto the end of the rod. Repeat this process
with the second door.

5) Cover the windows.

Now that you’ve installed the door frames, it’s time to cover the windows. First, take some scrap plywood and cut it into rectangles that fit snugly inside the window openings. Apply some caulk to the seams. Afterward, use screws to secure the plywood boards to each other and the walls. Be careful not to let any nails stick up above the surface of the wall.

6) Add insulation.

You’ll want to add some insulation before installing the final layer of drywall. To do this, spread an inch or two of fiberglass insulation over the interior of the sauna. It doesn’t matter if the insulation is on top of the existing drywall; make sure that you don’t disturb the previous layers of drywall. Once the insulation is in place, spray some paint on the exterior of the sauna.

7) Hang the doors.

After painting the exterior of the saunas, it’s time to hang the doors. First, screw the hinges to the doorframes. Next, apply some glue to the outside of the doors. Finally, put the doors on their respective doorframes.

8) Mount the stovetop.

When you’ve finished hanging the doors, it’s time to mount the stovetop. Start by placing the stovetop on the wall. Screw the mounting brackets to the wall and then secure them to the stovetop with screws. Next, mount the stovetop to the shelves. Also, attach the burner grates to the top of the stovetop.

9) Create a firebox.

To create the firebox, first, get rid of the old wood stove. If possible, get rid of the chimney as well. The firebox will serve as a replacement for these items. Cut a square opening in the center of one side of the firebox. This is where you’ll insert the stovepipe. Make sure that the pipe extends past the back of the firebox by about six inches. In addition, cut a rectangular opening on the opposite side of the firebox about seven inches long and five inches wide. This is where your fire grate will go. Attach it to the back of the firebox using screws.

10) Prepare the firepit.

Next, prepare the fire pit. Assemble the necessary equipment. You’ll need a shovel, a rake, and a wheelbarrow. Fill the wheelbarrow with sand and gravel. Use the rake to level off the ground inside the fire pit. Then, sprinkle some charcoal powder all over the floor.

11) Finish the project.

Once you finish building your sauna, you’ll want to decorate it with some finishing touches. First, fill the water tank with hot water. Next, hang some towels around the sauna so that people can sit comfortably inside.

Are our outdoor saunas safe?

Yes! While they’re certainly not foolproof, most outdoor saunas are very safe. They can withstand extreme temperatures and even severe weather. However, there are a few things that you should consider when choosing an outdoor sauna. For example, avoid saunas made from metal because they can rust. Also, be aware that saunas may have sharp edges. So, keep an eye out for exposed pipes and wires that could cause injury.


Home saunas are one of the easiest ways to add heat to your home. They provide warmth and relaxation while also helping to reduce stress levels. If you live somewhere in freezing weather, then using a homemade sauna may not be practical. However, if you live somewhere with mild winters, you should consider making your outdoor sauna.


Please enter your comment!
Please enter your name here