How to Make An Easel With Plywood Boards

Easel With Plywood

Learn how to Make a DIY Easel A lot of people struggle to nd the perfect easel for their art pieces. If you’re looking for an affordable way to display your artwork, then you might want to consider building your easel instead of buying one.

With a quick tutorial, you’ll be able to build a sturdy easel in less than 30 minutes. It’s also a fun project to do with kids.

If you want to create an easel out of plywood boards, you should know that there are several ways todo it. You can use different materials such as wood, metal, plastic, etc.

But if you want to make an easel using plywood boards, then here are some tips that you should follow.

How to make an easel out of plywood boards?

Step 1: Choose Your Materials and Tools

First things first, before starting this project, you need to choose what kind of material you will use. You have two options: wooden or non-wooden. The latter is usually made from aluminum, but sometimes they come in other types too.

The best option would be to buy the cheapest ones because, after all, you don’t need anything fancy when making something like this. So, I suggest going for the cheap stuff so you won’t spend more money on unnecessary items later on.

It would help if you decided whether you want to go with a traditional style or modern design.

Traditional techniques tend to look better, while contemporary designs are easier to assemble. But since we’re talking about plywood, both kinds of styles work just fine.

You may not even notice any difference between them once you’ve completed the task. However, the choice is entirely up to you.

Now let’s talk about tools. For this particular project, you only need essential hand tools, including screwdrivers, saws, hammers, nails, pliers, clamps, rulers, pencils, tape measurers, cutting mats, etc.

It doesn’t matter much if you already have these tools at home since most stores sell them separately anyway. What matters is having enough space where you can store everything safely until needed.

Step 2: Cut Out Your Pieces

Once you decide what type of materials you will use, now comes time to cut them into smaller parts.

This step requires patience and skill since you need to plan every single move carefully.

Start by measuring each piece of a plywood board and mark its center point. Then draw lines around the edges of the board. Next, take off the excess paper covering the surface of the plywood. Once done, set aside the board and repeat the same steps for another three panels.

Afterward, glue down all four sides of the boards together. Use masking tape to hold the panels firmly against each other. Let dry completely. After that, remove the videos and trim away the excess part along the edge of the board. Repeat the process with the remaining panels.

Step 3: Assemble the Frame

This next step involves assembling the frame itself. Start by gluing the top side of the boards together.

Place the bottom half of the board over the top portion and align the holes perfectly. Now clamp the boards tightly together.

Repeat the same procedure for the opposite side of the frame. When finished, flip the whole assembly upside down. Glue the backside of the frame onto the front side. Finally, attach the legs securely to the base of the frame.

Step 4: Add Paint & Markings

For painting purposes, add paint to the entire frame. Be careful not to apply too much, though, since it may cause the canvas to warp.

If you want your easel to stand upright and look good, then it needs some markings. To do that, nd a suitable place near a window and hang the easel there. If possible, leave it hanging overnight to allow the wood to absorb the color entirely.

Step 5: Hang It Up!

Finally, hang the easel somewhere convenient such as inside your house or garage. Don’t forget to label it appropriately.

That way, you’ll know exactly how to identify it whenever someone asks you, “where did you get that?”

There are several ways to build an easel. One method uses a pre-made kit consisting of 1/2″ thick MDF panels glued together with screws. They also require drilling through the panel thicknesses. These kit scan range from $20 – $100 depending upon the size and number of pieces.

A second method is to purchase individual components, including frames, stretchers, supports, hinges, hardware, paints, brushes, etc., and assemble those yourself using standard carpentry techniques.

There are numerous websites offering plans for building one of these. Some offer free programs, and others charge a fee. Both methods provide an easy DIY solution without requiring special skills.

Another alternative is to create your custom-built easel.

You could start with a simple design in mind and use the steps mentioned above. Your easel will look even more good and the way you want it!


Please enter your comment!
Please enter your name here